Audio Technica AT-PL120
Audio Technica AT-PL120 Description:
Direct Drive Professional Stereo Turntable System
This professional stereo turntable features a high-torque direct-drive motor for quick start-ups and a selectable internal stereo phono pre-amplifier that allows the turntable to plug directly to computers and other components with no dedicated turntable input.
Other features include: forward and reverse play capability; cast aluminum platter with slip mat and a start/stop button with remote start/stop input; three speeds 33/45/78; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% or +/-20% adjustment ranges; and removable hinged dust cover. A replaceable Audio-Technica ATP-2 cartridge is included.
Audio Technica AT-PL120 Features:
- Direct drive high-torque motor
- Selectable 33/45/78 RPM speeds
- Selectable internal stereo phono pre-amplifier
- S-shaped tone arm assembly with:
- - Adjustable counterweight
- - Anti-skate adjustment
- - Tone arm height adjustment and lock
- - Tone arm lift with hydraulic action and lift lever
- - Tone arm rest with locking mechanism
- Selectable high-accuracy quartz-controlled pitch lock
- Selectable +/-10% or +/-20% pitch adjustment ranges
- Stroboscopic platter speed indicator
- Forward and reverse play
- Cast aluminum record platter with slip mat
- Start/stop button with remote start/stop input
- Pop-up stylus target light
- 45-RPM adapter with storage receptacle
- Receptacle for extra headshell
- Adjustable feet for leveling
- Removable hinged dust cover
- Includes professional cartridge ATP-2
Audio Technica AT-PL120 Specifications:
Type 3-speed, fully manual operationMotor DC motorDrive Method Direct Drive Direct driveSpeeds 33-1/3 RPM, 45 RPM, 78 RPMPitch Variation +/-10% or +/-20%Turntable Platter Die-cast aluminumStarting Torque >1.6 kgm-cmBraking System Electronic brakeWow and Flutter <0.2% WRMS (33 RPM)Signal-to-Noise Ratio >50 dBOutput Level Pre-amp "Off": 2.5 mV nominal at 1 kHz, 5 cm/secPre-amp "On": 200 mV nominal at 1 kHz, 5 cm/secPhono Pre-Amp Gain 38 dB nominal, RIAA equalizedPitch Output Output signal to drive remote pitch indicator2.5V square wave signal675 Hz +/- 1 Hz for 33 and 45 RPM quartz locked speedsVaries from 540 Hz - 810 Hz when +/- 20% pitch is selectedVaries from 607 Hz - 742 Hz when +/- 10% pitch is selected1170 +/- 1 Hz for 78 RPMRemote Start/Stop 2 conductor 1/4" connector (T/S)Normally open contact closurePower Supply Requirements 115/230V AC, 50/60 HzPower Consumption 13WDimensions 17.75" (450 mm) W x 13.88" (352 mm) D x 6.0" (157 mm) HWeight 23.4 lbs. (10.6 kg)Accessories Included Headshell/cartridge (ATP-2); AC line cord; 45 RPM adapterReplacement Catridge: ATP-2 (Bonded round shank)Get your Audio Technica AT-PL120 today!
